LAISHA
Open Laisha

ICAR AIEEA-PG Post-Harvest Engineering of Horticultural Crops: practice questions

ICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
88written to this exam in this subject
11syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 120 minutes, 120 MCQs, +4 / −1, English only (2026 bulletin). One paper for the whole subject group.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Post-Harvest Engineering of Horticultural Crops in ICAR AIEEA-PG

Unit VI (processing, storage, refrigeration, cold stores, plant layout) asks definitions and standard relations: respiration and RQ, Q10, precooling methods, CA/MA principles, blanching and dehydration pretreatments, juice extraction and clarification, pectin gels, canning divide at pH 4.6, and spice processing steps. Single-answer MCQs with negative marking reward exact recall.

Keeping fruits and vegetables alive and saleable after harvest: cooling, handling, packhouses, controlled atmospheres and processing.

Our 88 ICAR AIEEA-PG questions in this subject: 52 easy, 26 medium, 10 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · easy

When malic acid (C4H6O5) is the main respiratory substrate, the respiratory quotient is about

  1. 1.00
  2. 1.33
  3. 0.70
  4. 0.75
Answer and working

B. 1.33

C4H6O5 + 3 O2 -> 4 CO2 + 3 H2O, so RQ = 4/3 = 1.33. An RQ of 1.0 applies to hexose sugars and about 0.7 to fats, which need more oxygen per carbon. 0.75 inverts the ratio (O2/CO2 = 3/4).

Question 2 · hard

One tonne of lettuce (specific heat 4.0 kJ/kg K) is vacuum cooled from 22 degC to 2 degC. Taking the latent heat of vaporisation as 2 480 kJ/kg and assuming all heat is removed by evaporation of product water, the water evaporated is about

  1. 240 kg
  2. 35 kg
  3. 32 kg
  4. 3.2 kg
Answer and working

C. 32 kg

m = m_p cp dT / hfg = 1 000 x 4.0 x 20 / 2 480 = 32.3 kg, about 3.2% of the mass, consistent with the rule of about 1% per 5 to 6 degC. Using the latent heat of fusion (334 kJ/kg) gives 240 kg; using 22 degC as the drop gives 35 kg.

Question 3 · medium

To vacuum cool lettuce to about 2 degC, the chamber pressure must be pulled down to about (saturation pressure of water: 0.61 kPa at 0 degC, 0.71 kPa at 2 degC, 2.34 kPa at 20 degC)

  1. 2.3 kPa
  2. 7.1 kPa
  3. 0.7 kPa
  4. 0.07 kPa
Answer and working

C. 0.7 kPa

Water boils from the tissue when chamber pressure equals the saturation pressure at product temperature, so the final pressure is the saturation pressure at 2 degC, about 0.71 kPa. 2.3 kPa only starts boiling at 20 degC; 7.1 and 0.07 kPa are decimal slips.

Question 4 · easy

Vacuum cooling is most effective for

  1. whole firm tomatoes
  2. leafy vegetables
  3. large netted melons
  4. potatoes and other dense tubers stored in bulk
Answer and working

B. leafy vegetables

Vacuum cooling depends on water evaporating from the product surface; lettuce has a very high surface-to-mass ratio and releases water easily. Dense, waxy or bulky products such as tomatoes and melons cool poorly because little water evaporates per unit mass.

Question 5 · medium

If slice thickness is doubled, other conditions unchanged, the falling-rate drying time to a given moisture ratio (diffusion-controlled) becomes about

  1. twice as long
  2. four times as long
  3. half as long
  4. unchanged
Answer and working

B. four times as long

In Fick's solution time appears as D t / L^2, so for the same moisture ratio t is proportional to L^2; doubling thickness quadruples the time.

Question 6 · easy

Vegetables are blanched before dehydration mainly to

  1. add sugar
  2. inactivate enzymes that cause off-flavour and discolouration in storage
  3. raise the moisture content so that drying is more uniform
  4. remove all microorganisms so that the dried product is fully sterile in storage
Answer and working

B. inactivate enzymes that cause off-flavour and discolouration in storage

Blanching inactivates enzymes such as peroxidase and catalase and removes tissue air; it reduces but does not eliminate microorganisms.

Question 7 · hard

A processor blends a 12 degBrix juice with a 65 degBrix concentrate to make 1 000 kg of a 20 degBrix base. The concentrate needed is about

  1. 151 kg
  2. 849 kg
  3. 178 kg
  4. 123 kg
Answer and working

A. 151 kg

Pearson square: juice parts = 65 - 20 = 45, concentrate parts = 20 - 12 = 8; concentrate = 1 000 x 8/53 = 151 kg. Check: 849.1 x 0.12 + 150.9 x 0.65 = 200 kg solids = 20%. 849 kg is the juice, not the concentrate. 178 kg divides the concentrate parts by the juice parts (1 000 x 8/45) instead of the total; 123 kg divides by 65.

Question 8 · hard

A ready-to-serve beverage is to contain 10% juice (juice at 12 degBrix) and 10% total soluble solids. Treating juice solids and added sugar as the only soluble solids, the sugar to add per 100 kg of beverage is

  1. 10.0 kg
  2. 1.2 kg
  3. 11.2 kg
  4. 8.8 kg
Answer and working

D. 8.8 kg

Juice = 10 kg contributing 10 x 0.12 = 1.2 kg solids. Sugar = 10 - 1.2 = 8.8 kg. Adding 10 kg ignores the juice solids; 1.2 kg is the juice's own contribution; 11.2 kg adds the juice solids instead of subtracting them.

Question 9 · easy

The purpose of exhausting cans before sealing is to

  1. sterilise the product before the lid is seamed on
  2. remove air so that a vacuum forms on cooling
  3. add syrup
  4. cool the product so that the seams do not distort
Answer and working

B. remove air so that a vacuum forms on cooling

Exhausting by heat or mechanical vacuum removes air, reducing oxidation, can strain during retorting and internal corrosion, and gives a vacuum after cooling.

Question 10 · easy

Parchment coffee is dried to about

  1. 30 to 35% moisture
  2. 2 to 3% moisture
  3. 50% moisture
  4. 10 to 12% moisture before hulling
Answer and working

D. 10 to 12% moisture before hulling

Parchment coffee is dried to roughly 10 to 12% moisture for safe storage and hulling; wetter beans mould, over-dried beans lose quality.

A study plan for Post-Harvest Engineering of Horticultural Crops in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (51% of the 88 questions): Dehydration of fruits and vegetables (13, 15%); Respiration and ripening physiology (12, 14%); Value addition (11, 13%); Juice extraction (9, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Pre-cooling: hydro, forced-air and vacuum cooling (9, 10%); Processing of spices and plantation crops (9, 10%); Grading, including machine vision (6, 7%); Washing, sorting and waxing (6, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Controlled and modified atmosphere storage (5, 6%); Packhouse design (5, 6%); Minimal processing (3, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Juice extraction (2 hard of 9), Pre-cooling: hydro, forced-air and vacuum cooling (2 hard of 9), Controlled and modified atmosphere storage (1 hard of 5).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Minimal processing (3 easy of 3); Grading, including machine vision (5 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Post-Harvest Engineering of Horticultural Crops

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.