LAISHA
Open Laisha

ICAR AICE-JRF/SRF Soil & Water Conservation Engineering: practice questions

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
43written to this exam in this subject
11syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Agricultural Engineering subjects 38–43 is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based computer test, 2 hours, 120 MCQs: 20 Part A (general knowledge and reasoning), 50 Part B (core group), 50 Part C (specialisation); four options.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Soil & Water Conservation Engineering in ICAR AICE-JRF/SRF

PG-depth understanding: RUSLE and MUSLE factor derivation and limits, sediment delivery and trap efficiency, drop-spillway energy dissipation, earthen dam seepage and stability under drawdown, wind erosion equation factors and shelterbelt design, and the role of remote sensing and GIS in erosion mapping.

Estimating erosion and designing the bunds, terraces, waterways, spillways, ponds and dams that control it.

Our 43 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 21 medium, 20 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · hard

A soil has 60% silt plus very fine sand, 20% clay, 2% organic matter, structure code 2 and permeability class 3. Using 100K = 2.1 M^1.14 (10⁻⁴)(12 − OM) + 3.25(s − 2) + 2.5(p − 3) and the factor 0.1317 to convert to SI, K in t·ha·h/(ha·MJ·mm) is closest to:

  1. 0.056
  2. 4.35
  3. 0.043
  4. 0.330
Answer and working

C. 0.043

M = (% silt + vfs)(100 − % clay) = 60 × 80 = 4800. 100K = 2.1 × 4800^1.14 × 10⁻⁴ × (12 − 2) = 33.02; the structure and permeability terms are zero. K (US units) = 0.330; × 0.1317 = 0.043 in SI. Forgetting the conversion leaves 0.330; forgetting to divide by 100 gives 4.35; ignoring the clay term in M gives a higher value. Ignoring the clay term (M = 60 × 100 = 6000) gives 0.056.

Question 2 · medium

Which of the following is outside the intended scope of the USLE?

  1. Choosing a support practice to keep loss below tolerance
  2. Predicting gully erosion from a single large storm
  3. Comparing average annual sheet and rill loss under two rotations
  4. Estimating the maximum slope length for a given cropping system
Answer and working

B. Predicting gully erosion from a single large storm

The USLE predicts long-term average annual sheet and rill loss. It was not built for single events or for gully and channel erosion. The other three are its standard planning uses.

Question 3 · hard

A small watershed produces a storm runoff volume of 5,000 m³ with a peak rate of 1.2 m³/s. With K = 0.03, LS = 1.5, C = 0.2 and P = 0.6, MUSLE (Y = 11.8 (Q qp)^0.56 K LS C P) gives a storm sediment yield closest to:

  1. 382 t
  2. 7.5 t
  3. 67 t
  4. 8.3 t
Answer and working

D. 8.3 t

Q·qp = 5000 × 1.2 = 6000; 6000^0.56 = 130.5. Y = 11.8 × 130.5 × 0.03 × 1.5 × 0.2 × 0.6 = 8.3 t. Adding Q and qp (5001.2^0.56) gives 7.5 t, dropping the exponent gives 382 t, and the US-units coefficient 95 with SI inputs gives 67 t.

Question 4 · hard

A small reservoir has 60,000 m³ of dead storage. Sediment inflow is 6,000 t/yr, trap efficiency 85% and deposit dry density 1.2 t/m³. Assuming these stay constant, the dead storage fills in about:

  1. 10.2 years
  2. 12.0 years
  3. 11.8 years
  4. 14.1 years
Answer and working

D. 14.1 years

Volume trapped per year = 6000 × 0.85 / 1.2 = 4,250 m³. Life = 60,000 / 4,250 = 14.1 years. Ignoring trap efficiency gives 12.0; ignoring density gives 11.8. In reality trap efficiency falls as the reservoir fills, so life is somewhat longer. 10.2 years multiplies by the trap efficiency instead of dividing (60,000 × 0.85/5,000).

Question 5 · hard

For a parabolic waterway with top width 3.0 m and flow depth 0.6 m, the approximate hydraulic radius R = T²D/(1.5T² + 4D²) is closest to:

  1. 0.361 m
  2. 0.400 m
  3. 0.300 m
  4. 0.429 m
Answer and working

A. 0.361 m

R = 3.0² × 0.6/(1.5 × 3.0² + 4 × 0.6²) = 5.40/(13.50 + 1.44) = 0.361 m. Dropping the 4D² term gives (2/3)D = 0.400 m, acceptable only when T is much larger than D; D/2 = 0.300 m is a guess; the rectangular-channel formula bD/(b + 2D) with b = T gives 0.429 m.

Question 6 · medium

For an actively advancing gully with a large runoff-producing catchment above it, the first engineering step is to:

  1. divert or control runoff above the gully head and stabilise the head
  2. build check dams from the outlet upward only, starting at the gully mouth
  3. plant trees along the gully bed
  4. reshape the gully banks to 1:1
Answer and working

A. divert or control runoff above the gully head and stabilise the head

Gullies advance by head-cutting, so stopping runoff over the head and stabilising it comes first, alongside catchment treatment. Check dams and planting follow once the flow is controlled.

Question 7 · hard

A homogeneous earth dam on an impervious foundation has a horizontal toe filter. The water depth is 8 m, and the horizontal distance from the filter's upstream end to the corrected entry point of the phreatic line is 30 m. With k = 1 × 10⁻⁶ m/s, the seepage per metre length by the Kozeny parabola is closest to:

  1. 0.691 m³/day
  2. 1.05e-06 m³/day
  3. 2.68 m³/day
  4. 0.091 m³/day
Answer and working

D. 0.091 m³/day

y0 = √(h² + d²) − d = √(64 + 900) − 30 = 1.048 m. q = k y0 = 10⁻⁶ × 1.048 = 1.048e-06 m³/s per m = 0.091 m³/day per m. Using h instead of y0 overestimates eightfold; forgetting to subtract d gives 2.68. Using h instead of y0 gives 0.691 m³/day.

Question 8 · hard

A dry, cohesionless embankment fill has an angle of internal friction of 32°. For an infinitely long slope of 2.5:1 (horizontal:vertical), the factor of safety against sliding is closest to:

  1. 1.32
  2. 1.56
  3. 0.62
  4. 0.25
Answer and working

B. 1.56

tan β = 1/2.5 = 0.4. F = tan φ / tan β = 0.6249/0.4 = 1.56. Dividing by 2.5 instead of by 0.4 gives 0.25; using sin φ instead of tan φ gives 1.32; quoting tan φ alone (0.62) ignores the slope.

Question 9 · medium

A horizontal blanket (filter) drain at the downstream base of a homogeneous earth dam is provided chiefly to:

  1. keep the phreatic line well inside the downstream slope and lower pore pressures there
  2. increase storage in the reservoir
  3. reduce seepage through the foundation to zero by cutting off all flow beneath the whole dam
  4. prevent overtopping during floods
Answer and working

A. keep the phreatic line well inside the downstream slope and lower pore pressures there

The drain draws the seepage line down to its upstream end so it cannot emerge on the downstream face, where it would cause sloughing and piping. It does not stop seepage and has nothing to do with overtopping.

Question 10 · medium

In the Wind Erosion Equation E = f(I, K, C, L, V), the factor L represents:

  1. the unsheltered distance across the field along the prevailing erosive wind
  2. the lime content of the soil
  3. the height of the nearest windbreak or shelterbelt on the upwind edge of the field
  4. the length of the growing season
Answer and working

A. the unsheltered distance across the field along the prevailing erosive wind

I is soil erodibility, K ridge roughness, C the climatic factor, L the unsheltered field length along the wind direction and V vegetative cover. Windbreaks and strip cropping act by reducing L.

A study plan for Soil & Water Conservation Engineering in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (53% of the 43 questions): Soil loss estimation: USLE, RUSLE and MUSLE (7, 16%); Earthen dams: seepage and stability (6, 14%); Drop, drop-inlet and chute spillways (5, 12%); Wind erosion mechanics (5, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Sediment yield (4, 9%); Wind erosion control and shelterbelts (4, 9%); Grassed waterways (3, 7%); Mechanics of water erosion (3, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Bench and broad-base terraces (2, 5%); Contour and graded bunds (2, 5%); Gully control (2, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Drop, drop-inlet and chute spillways (4 hard of 5), Grassed waterways (2 hard of 3), Soil loss estimation: USLE, RUSLE and MUSLE (4 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Sediment yield (1 easy of 4); Soil loss estimation: USLE, RUSLE and MUSLE (1 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Soil & Water Conservation Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.