ICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papersICAR AIEEA-PG — Agricultural Engineering & Technology (Major Subject Group 10) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 120 minutes, 120 MCQs, +4 / −1, English only (2026 bulletin). One paper for the whole subject group.
Source: icar.org.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Unit V farm machinery and power: definitions of slip, tractive efficiency, rolling resistance, cone index, weight transfer and stability, with short calculations.
How soil resists tools and supports wheels: draft, slip, tractive efficiency, weight transfer and stability.
Our 49 ICAR AIEEA-PG questions in this subject: 30 easy, 17 medium, 2 hard, across 13 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.
As the rake angle of a narrow tine is increased from 30° to 90°, draft at a fixed depth generally
D. increases
A steeper face pushes soil forward and must overcome more passive resistance, so draft rises with rake angle. Low rake angles lift soil gently at lower draft.
An implement with a draft of 8.10 kN is pulled at 5.0 km/h. What drawbar power does it require?
D. 11.25 kW
P = D × v = 8.10 kN × (5.0/3.6) m/s = 11.25 kW. Multiplying by km/h without converting gives 40.50; dividing by 0.746 converts to horsepower, not kW. 15.08 kW divides by 0.746; 145.80 kW multiplies by 3.6 instead of dividing.
A tractor covers a marked distance in 17 drive-wheel revolutions without load and in 20 revolutions when pulling a plough. What is the slip?
D. 15.0 %
s = 1 − N0/N1 = 1 − 17/20 = 15.0 %. Using (N1 − N0)/N0 = 17.6 % is the common wrong basis: slip is referred to the loaded revolutions (theoretical travel). 85.0 % is N0/N1 itself; 8.1 % divides the difference by the sum of the revolutions.
In 10 revolutions a drive wheel travels 46 m in the no-load condition and 40 m under load. Find the slip and the rolling radius.
B. 13.0 % and 0.732 m
s = 1 − L1/L0 = 1 − 40/46 = 13.0 %. Rolling radius from the reference condition: 46/10 = 4.6 m per revolution; r = 4.6/(2π) = 0.732 m. Using loaded travel gives 0.637 m, which is not the reference; dividing by π gives the diameter.
Why must the rolling radius, not the unloaded tyre radius, be used when calculating theoretical speed for slip?
C. The unloaded radius is larger than the effective radius, so it overstates theoretical speed and therefore overstates slip
Distance per revolution on the reference surface defines the effective (rolling) radius, which is less than the unloaded radius because the tyre deflects. Using the larger radius inflates vt and hence s.
A two-wheel-drive tractor with wheelbase 2.2 m pulls a horizontal drawbar load of 20 kN at a hitch height of 0.5 m. How much weight is transferred from the front to the rear axle?
D. 4.55 kN
ΔW = P·h/L = 20 × 0.5/2.2 = 4.55 kN. Inverting h and L gives 88.0 kN; forgetting to divide by L gives a moment, not a force. 10.0 kN is the moment P·h; 2.27 kN halves the transfer.
A tractor weighs 30 kN with CG 0.8 m ahead of the rear axle. Ignoring rolling resistance, what horizontal drawbar pull at 0.6 m height would reduce the front axle load to zero on level ground?
A. 40 kN
Rf = (W x − P h)/L = 0 → P = W x/h = 30 × 0.8/0.6 = 40 kN. In practice slip limits pull well before this, but a stuck wheel or high hitch changes the picture. 22.5 kN inverts x and h; 24 kN is the moment W·x; 10.9 kN uses the wheelbase in place of the hitch height.
A 2WD tractor weighing 32 kN (CG 0.85 m ahead of rear axle, wheelbase 2.3 m) pulls 16 kN horizontally at 0.55 m height on level ground. Find the dynamic rear axle reaction.
A. 24.00 kN
Moments about rear contact: Rf = (W x − P h)/L = (32 × 0.85 − 16 × 0.55)/2.3 = 8.00 kN. Rr = W − Rf = 24.00 kN. 8.00 kN is the front reaction; 20.17 kN is the static rear load. 40.00 kN adds the drawbar pull to the rear reaction.
Why are cage wheels used on power tillers in puddled rice fields?
A. They sink through soft mud to the firmer layer, grip it with lugs and do not clog with mud
Cage wheels are open, lugged steel wheels; they reach the hardpan and engage it while shedding mud. Floats, not cage wheels, carry weight on the surface.
A two-wheel trailer carrying 12 kN has a coefficient of rolling resistance of 0.08 on a tilled field. What pull is needed to tow it on level ground at steady speed?
C. 0.96 kN
Pull = coefficient × load = 0.08 × 12 = 0.96 kN. Halving for two wheels is wrong: the coefficient applies to the total load carried. 150 kN divides the load by the coefficient; 0.48 kN halves it; 11.04 kN subtracts the resistance from the load.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.